Seacoast Medical Devices

BioMedical Life Systems is proud to introduce its new generation in Electro-Therapy Devices, the Impulse® TENSD5 Digital TENS Device. The new look of the device incorporates a “Clam Shape” design that when closed, covers the LCD Screen and Control Buttons.

The inside flip top cover includes an instruction diagram to guide the user through five modes of operation; constant, width modulation, rate modulation and two different types of burst. A timer allows the patient to use the device for a specified period of time and a low battery indicator light illuminates when the AA batteries need to be changed. If the device is not correctly attached to the patient, the amplitude does not increase.

General Specifications
Size: 4.2" x 2.9" x 1.4" (10.7cm x 7.4cm x 4cm) Weight: 3.35 oz (94.97 grams) Power Source: 2 AA batteries Channels: Dual Waveform: Symmetrical, biphasic square wave Pulse Rate (Hz): 1 120 Hz (Hertz or pps) adj. Pulse Width (µS): 25 250 miscroseconds (µS) adjustable Output: Constant current Constant: Conitnuous stimulation. Pulse rate/Pulse Width are adjustable Pulse Rate Modulation: Pulse Rate modulates from 100Hz dow to 20Hz over a 15 second cycle (7.5 seconds down, 7.5 seconds up). Pulse Width is adjustable. Pulse Width Modulation: Pulse width modulates from 125-250µS and back down over a 5 second cycle (2.5 seconds down, 2.5 seconds up). Pulse Rate is adjustable. Burst I: One second ON. One second OFF. Pulse Rate and Pulse Width are adjustable. Burst II: Seven Pulses per burst, 2 bursts per second. Pulse Width is adjustable Output: Constant current Intensity: Continuously adjustable from 0-100 mA peak to peak Output Voltage: Continuously adjustable from 0-50 V peak to peak Tolerances: +/-1%   Data recorded across a 500 ohm load resistance

BioMedical Life Systems Inc., Digital,  BioStim® M7 TENS Device has seven programmable functions; Continuous, Width Modulation, Rate Modulation, Rate and Width Modulation, SD1, SD2 and Cycled Burst. The device has a Patient Lock System that, when activated prevents the patient from changing any of the set parameters. When the Patient Lock Systems is turned off, a Patient Compliance Meter is displayed showing how long the device was used. A timer allows the patient to use the device for a specified period of time. The two-channel device incorporates touch proof design and is run by two AA Batteries.




General Specifications
Size: 3.25” x 2.25” x 1 5/8” (82 mm x 70mm x 45mm) Weight: 8 oz (266 grams) Channels: Dual Waveform: Asymmetrical rectangular biphasic (TENS) Pulse Rate (adj.): 1- 200 Hz Pulse Width (adj.): 10 - 250 µs Stimulation Modes:   Continuous: Constant Stimulation Rate Modulation: 50% decrease/increase of set value over a 5 second cycle Width Modulation: 50% decrease/increase of set value over a 5 second cycle Rate/Width Modulation: 50% decrease in set value over a five second period. As rate increases, width decreases. SD1: Increase of set pulse width 40%, decrease of set pulse rate 45% and decrease of amplitude 10% over a 3 second period. Values return to original settings over the next 3 seconds. SD2: Increase of set pulse width 60%, decrease of set pulse rate 90% and decrease of amplitude 13% over a 6 second period. Values return to original settings over the next 6 seconds. Cycled Burst: 2.5 seconds on. 2.5 seconds off. Adjustable Rate and Width. Output Voltage: 49 Volts peak to peak Intensity (adj.): 0-98 mA Power Supply: 2 AA Batteries Data was recorded across a 500 ohm resistance load.

BioMedical Life Systems is proud to introduce the new generation of the Company’s popular BioMed® 2000 analog TENS device, the BioMed® 2000 XL and BioMed® 2000 XT with Timer.

The new ergonomically designed device has the same parameters as its predecessor; adjustable pulse rate and pulse width, and has three modes of operation; constant, width modulation, and burst. The new design of the device incorporates a sliding amplitude control cover for safety, and a permanently attached 9 volt battery cover to prevent loss. The 9 volt battery compartment has been redesigned for simple insertion and removal of the battery. To provide comfort while wearing, the belt clip has been positioned horizontally.



General Specifications
Dimensions: 3.9" x 2.75" x 1" (99mm x 70mm x 25mm) Weight: 4.6 oz (132 g) Power Source: 9V Battery, E-block, type 6F22 Channels: Dual Waveform: Asymmetrical, biphasic square-wave Frequency: 2-150 Hz (Hertz or pps) Impulse Width: 50 - 250 microseconds (µs) adjustable Output: Constant Current Continuous: Continuous stimulation Burst: 8 pulses per burst/2 bursts per second Modulation: Decrease/increase of set width of 50% over a five-second period Number of electrodes/Leadwires 4 Tolerances: +/- 10%   General Specifications of BioMed® 2000 XT with Timer Dimensions: 3.9" x 2.75" x 1" (99mm x 70mm x 25mm) Weight: 4.6 oz (132 g) Power Source: 9V Battery, E-block, type 6F22 Channels: Dual Waveform: Asymmetrical, biphasic square-wave Frequency: 2-150 Hz (Hertz or pps) Impulse Width: 50 - 250 microseconds (µs) adjustable Output: Constant Current Continuous: Continuous stimulation Burst: 8 pulses per burst/2 bursts per second Modulation: Decrease/increase of set width of 50% over a five-second period Number of electrodes/Leadwires 4 Tolerances: +/- 10% Timer: Continuous, 15, 30, 60 Data recorded across a 500 ohm load resistance

BioMedical Life Systems, Inc. is proud to announce the newest generation in its Interferential Device line, the digital BioStim® INF. Three pre-programmed sweeps; 1-10 Hz, used for Edema Reduction, 80-150 Hz used for Pain Relief and 1-150 Hz for total treatment allow for easy set up and patient instruction. The Device offers bipolar stimulation using two electrodes where the interferential stimulation is already "mixed" or Full Interferential stimulation with the use of four electrodes. The device has a timer for the desired treatment time and comes with a wall adaptor or operates from four AA batteries.





General Specifications
Size: 3.25" x 2.25" x 1 5/8"
(82 mm x 70 mm x 45mm) Weight: 8 oz (226 grams) Carrier Frequency: 4000 Hz, fixed Interference Frequency: 4001-4150 Hz, adjustable Difference Frequency: 1-150 beats per second, adjustable Bipolar Stimulation: Channel 1 Output Current: 0-66 milliamps peak to peak with 500 ohm load Output Voltage: 0-33 Volts peak to peak with 500 ohm load Waveform: Pulsed Sine Wave Pulse Width: 125 microseconds for each phase Max. Charge per Cycle: 12.5 microcoulombs Power Supply: 4 AA (L00083) batteries or Medical Grade Wall Adaptor Low Battery Indicator: Indicates when batteries are low Four Frequency Shifts: Continuous, 1-10 Hz over 6 seconds and 80-150 Hz over 8 seconds and 1-150 Hz over 10 seconds. Tolerance: +/-1% Output parameters are across a 500 ohm resistance.

The Pre-Wired Electrodes offer extreme flexibility. Designed to last two weeks or more, the adhesive is durable while being non-irritating. The pre-wired socket system permits easy lead wire connections when the electrode is applied to those "hard to reach" areas such as the upper and lower back.